

Use Cases
Single Component Top Coat
High traffic and UV stable Concrete Sealer
Hot tire, scratch, and stain resistant
Aliphatic MC
Single Component Top Coat
High traffic and UV stable Concrete Sealer
Hot tire, scratch, and stain resistant
• Meets USDA, FDA, EPA, and SCAQMD Standards
• Eligible for LEED Points
• Adhesion to Concrete, Wood, Metal, Non-glazed Tiles
• Antibacterial
• Can Be Applied at or Above 40°F
• Easy Installation
• High Traffic and Hot Tire Resistance
• Low Maintenance
• Scratch Resistance
• UV Resistance
• Waterproofing
• DO NOT apply single coat greater than 7 mils thick (230 SF per gallon). Do not install directly over moisture-sensitive
concrete, broadcasted vinyl chip, 30-grit or larger quartz, or 80-mesh or larger aluminum oxide.
• DO NOT let material puddle on floor. This may cause white spots to appear when coating cures.
• Complete samples and onsite mockups to ensure desired results are achieved.
• Application temperatures: Material cures faster as temperature and humidity increase. Material cures slower as they
decrease.
• Application times are based on test results compiled by lab technicians in a controlled setting. All times recorded using 1-
quart samples.
• If application temperatures are outside of those recommended, contact your KRETUS® Technical Representative.
• Coverage rates are for estimating purposes only. Factors such as waste, unusual/abnormal substrate conditions, and
other unforeseen jobsite conditions may affect actual product yields and are the responsibility of the installer.
• Apply material when temperature is decreasing—adhere to the KRETUS® Dew Point Calculation Chart available at
kretus.com/project-planning. DO NOT apply under direct sunlight. DO NOT install under inclement weather conditions.
KRETUS® ALIPHATIC MC is a single-component, UV-resistant aliphatic urethane available in gloss or low gloss and best used as a top coat or as a concrete sealer.
