Top Shelf® Epoxy Patch

• UV Resistance: Coating will amber over time. If color stability is important, use UV-stable Urethane Polymer 

Concrete RC UV, Polyurethane, Polyaspartic, or Acrylic Sealer. See kretus.com/products.

• Prime Coat: A prime coat may be required if stem walls are highly absorbent, if outgassing is suspected or prevalent, or

if concrete is very porous or in poor condition. All concrete repairs must be completed before installing any

system.

• DO NOT apply single coat greater than 4"

• Complete samples and onsite mockups to ensure desired results are achieved. 

• Application temperatures: When temperatures increase, material cures faster. Material cures slower when 

temperatures decrease.

• Application times are based on test results compiled by lab technicians in a controlled setting.

• If application temperatures are outside of those recommended, contact your KRETUS® Technical Representative. 

• Coverage rates are for estimating purposes only. Factors such as waste, unusual/abnormal substrate conditions, and 

other unforeseen jobsite conditions may affect actual product yields and are the responsibility of the installer.

• Apply material when temperature is decreasing—adhere to the KRETUS® Dew Point Calculation Chart available at 

kretus.com/project-planning. DO NOT apply under direct sunlight. DO NOT install under inclement weather conditions.

• Recommended for Applicators level 3 and up. (See kretus.com/applicator-skill-level.)